![]() ![]() To increase the volume of an individual string, raise its corresponding pair of pole screws, and to reduce output, lower the screws. Determine which strings sound balanced and which are comparatively loud or quiet. ![]() Set a neutral clean amp tone, select the bridge pickup, form an A major barre chord at the 5th fret and pick through the strings as evenly as possible. ![]() Again, TV Jones provides guidance on screw-height settings but results will vary depending on string gauge and bridge radius. This allows for some upwards and downwards movement. That’s how Gretsch did things, but you can only do it on Filter’Trons with loose covers.īefore height setting, tighten the 24 pole screws all the way down, then undo each by half a turn. If it looks like the bridge pickup will need excessive shimming, try placing a thin rectangle of plastic or wood veneer between the bottom of the magnet and the base plate. You could start with foam to determine the optimum height before calculating the thickness required for the wood shims. Alternatively, try wood shims under the ends of the pickups. TV Jones supplies foam spacers that allow a bit of movement. Setting height with suspended Filter’Trons is easy but traditionally mounted Filter’Trons are screwed onto the top and sit inside routed recesses. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |